TCP Smart Wi-Fi LED IP65 Tapelight Extension Kit Colour Changing

Product Information

To isolate the issue, we suggest that you turn off the 5.0 GHz channel for a brief period. From there, retry the connection with the TCP lighting. You can then insert the ends of the tape, with the copper terminals exposed, into the fastening clips.

Make sure to follow their instructions step by step to maximize your chances of overcoming this problem. Full control of the lights is through the app. As with other TCP products, such as the Smart WiFi Plug, there’s a choice of two apps: the TCP app or SmartLife. This is because the underlying technology is based on SmartLife. I prefer to use the SmartLife app, as I can combine devices from different manufacturers into one place. In both cases, the control and interface are the same. How to install waterproof LED strip lights? If you are installing your lighting outside or in a bathroom, you will want to make sure they are waterproof. Most LED strips have a casing to protect them from water and steam. It is best practice to ensure they have an IP rating of at least 65 to ensure they can hold up against splashes of water and that they will not damage the LED lighting underneath. On the other hand, having a professional install these units will help you secure a more consistent response.One of the biggest appeals to LED strip lighting is its adaptability. By cutting strips you can continue your stream of light around corners. While it will depend on the brand you choose, most LED strips can be cut. Some will have a cutting line or scissor icon at each space where the lights can be safely cut without damaging the circuiting. These are generally earmarked by a pair of copper dots at the end of the LED. How Do You Cut Led Strip Lights? LED strip lights are designed to make cutting easy, so all you will need is a pair of scissors. Either follow the cutting line (that sometimes also has a scissor icon on it) or cut between the pair of copper dots that show up at the end of each LED unit. Cutting anywhere else will potentially damage the circuitry and render your reel of lights useless. LED strip lighting has transformed the way we light our homes. Their flexibility means they can be installed practically anywhere. They are able to light areas normally left in shadow by ceiling lights, such as cabinets and kitchen worktops. LED strips are also a perfect way to add mood lighting to your room as they come in a range of RGB colours and different colour temperatures. Some can even be changed by remote control to suit different purposes. The most common issue that users have mentioned while using the TCP lights is that they’re not able to get the smart lights connected to the Home Network. Most of the time, the situations with these lights not turning on are more related to the hardware and not minor configurations.

Keep in mind that using a dimmer switch will also damage your lights in the long term, and they will wear out faster.Looking to install TCP lighting solutions in your smart home, go through these common issues to increase your understanding of these lights. LED Pro Line Strip Luminaire – 4′, 32W, 40K SKU: PSP4UZDA840K View Details View Spec Sheet Read more Using a dimmer switch can also cause your smart lights to behave like this. If the lights are not compatible with the dimmer, then you can’t make use of these systems with the dimmer switch. How do you connect LED strip lights to light switches? Connecting your driver to a light switch requires a little more expert hardwiring knowledge. You need to match the wires on the lights to the corresponding wiring in the switch. If you are unsure, consult a professional. So, if the reading on the voltmeter or the multimeter is not optimal, going with a different source is a better idea.

Do you want to learn how to install, cut & connect LED strip lights? This LED strip lights guide will tell you everything you need to know about cutting, connecting and installing LED strip lighting. Since the TCP LED+ Outdoor Festoon Light uses Bluetooth, I had to be within range of the lights to control them. I’d have preferred a Wi-Fi connection, since this would extend range and allow the lights to work via Alexa, Google Assistant and IFTTT. Bluetooth devices can be internet connected if a gateway is available, but TCP doesn’t sell such a device. As it stands, the only way to take smart control is when you’re in your own home. Performance

Most often than not, these issues are related to unstable voltage or a dimmer switch installed in your outlet. So, to narrow down on these errors, just reach out to a professional. He will take care of the power connections for you, and you won’t have to get through this error yourself. Take your connecting wires and cut them to the length you require leaving approximately half an inch extra on each end. This extra length is so you can strip the casing off the ends of the wire, ready to connect to the LED strip.

While the majority of these issues are easy to fix, you will still need to spend a bit of time on the installation. Simple to install, and offering great value, these outdoor lights are are fun addition to any garden. However, Wi-Fi over Bluetooth would have been better, and the bulbs are a touch ugly when turned off. Design and Features Most of the time, the experience with these lights will be effortless but if you’re not too sure about the power status, then reaching out to a local electrician is a better idea. First of all, you should open up your Alexa app and go to the skill options. From there, you should remove the TCP smart skill and reboot your mobile phone once. However, if the lights are damaged, and you’re not sure about the hardware, then claim the warranty immediately. The warranty is valid for 12 months, and you can seek help from professionals to get a new one.You need to make sure that it matches the requirements mentioned in the user manual. Otherwise, you will keep running into similar issues. How to connect LED strip lights to the battery? You can connect to a battery by a driver installed between the LED strip lights and the power source. Make sure the polarity of the wires matches the battery for a complete connection. One of the best things about LED strip lighting is that you do not have to be an electrician to install them. You can find starter kits that will provide you with everything you need to make the process as easy as possible. Always plan before you get started. Make sure the LED strips are the right length for the space and that you can reach your power source easily.